The pulse oxygen saturation is the percentage of the oxygen saturation/concentration (SpO2) in your blood. It is an important bio-parameter for the respiration. The ideal way of measuring your blood oxygen saturation is by using a pulse oximeter. A person just has to put his/her finger into the device and a fingertip photoelectric sensor does the work and calculates your oxygen saturation in your blood as a percentage. While this device does not diagnose the condition of your lungs, you can find out your baseline reading and monitor this overtime to see if there are any changes over time.
- Operation is simple and convenient.
- Small, light and convenient to carry.
- Very low power consumption - can be operated continuously for 20 hours.
- Enter standby mode when not in use after 5 seconds.
- Display direction changes automatically for easy viewing at all times.
- Spot checking Oxygen Saturation (SpO2) in blood. Pulse rate and intensity.
- Display Format: LCD Display
- SpO2 Measuring Range: 0% ~ 100%
- Pulse Rate Measuring Range: 30 bpm ~ 250 bpm;
- Pulse Wave Display: column and the waveform display.
- Power Requirements: 2×1.5 V AAA alkaline battery (or using the rechargeable battery instead), adaptable range: 2.6 V~3.6 V.
- Power Consumption: Smaller than 30 mA.
- Resolution: 1% for SpO2 and 1 bpm for Pulse Rate.
- Measurement Accuracy: ±2% in stage of 70% ~ 100% SpO2, and meaningless when stage being smaller than 70%. ±2 bpm during the pulse rate range of 30 bpm ~ 99 bpm and ±2% during the pulse rate range of 100 bpm ~ 250 bpm .
- Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm during the pulse rate range of 30 bpm ~ 99 bpm and ±2% during the pulse rate range of 100 bpm ~ 250 bpm .
- Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.
- Equipped with a function switch: Will enter standby mode when no signal is in the product within 5 seconds.
- Optical Sensor: Red light (wavelength is 660 nm, 6.65 mW), Infrared (wavelength is 880 nm, 6.75 mW)
Serving Downtown Toronto, Midtown, North York, East York, Scarborough, Etobicoke, York, Vaughan, Markham, Woodbridge, Brampton, Caledon, Mississauga, Oakville, Burlington, Ajax, Pickering, Oshawa, Whitby and all of Greater Toronto Area (GTA)
Pictures & Videos are for illustration purposes. Product functionality may not be exactly as shown.
If you have any questions, please call us at 1-855-565-6251